The Effect of Viscosity on the Diffusion and Termination Reaction of Organic Radical Pairs

The effect of viscosity on the diffusion efficiency (F_dif) of an organic radical pair in a solvent cage and the termination mechanism, that is, the selectivity of disproportionation (Disp) and combination (Comb) of the geminated caged radical pair and the diffused radicals encountered, were investigated quantitatively by following the photolysis of dimethyl 2,2′-azobis(2-methylpropionate) (V-601) in the absence and presence of PhSD. F_dif and Disp/Comb selectivity outside the cage [Disp_(dif)/Comb_(dif)] are highly sensitive to the viscosity. In contrast, the Disp/Comb selectivity inside the cage [Disp_(cage)/Comb_(cage)] is rather insensitive. The difference in viscosity dependence between Disp_(cage)/Comb_(cage) and Disp_(dif)/Comb_(dif) is explained by the spin state of the radical pair inside and outside the cage and the spin state dependent configurational changes of the radical pair upon their collision. Given that the configurational change of the radicals associates the displacement and reorganization of solvents around the radicals, the termination outside the cage, which requires larger change than that inside the cage, is highly viscosity dependent. Furthermore, while the bulk viscosity of each solvent shows good correlation with F_dif and Disp/Comb selectivity, microviscosity is the better parameter predicting F_dif and Disp_(dif)/Comb_(dif) selectivity regardless of the solvents.     

Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。     

Construction of Cyclobutanes by Multicomponent Cascade Reactions in Homogeneous Solution through Visible-Light Catalysis

[2+2] Photocycloaddition of two olefins is a general method to assemble the core scaffold, cyclobutane, found in numerous bioactive molecules. A new approach to synthesize cyclobutanes through multicomponent cascade reactions by merging aldol reaction and Witting reaction with visible-light-induced [2+2] cycloaddition is reported. An array of cyclobutanes with high selectivity has been achieved from commercially available aldehydes, ketones (or phosphorus ylide), and olefins with visible-light irradiation of a catalytic amount of (fac-tris(2-phenylpyridinato-C₂,N)iridium) ([Ir(ppy)₃]) at room temperature. Control experiments and spectroscopic studies revealed that the triplet–triplet energy transfer from the excited [Ir(ppy)₃]* to enones, generated in situ from aldehyde and ketone or aldehyde and phosphorus ylide, is responsible for these simple and efficient muticomponent transformations.     

Enantioselective C2-Alkylation of Indoles through a Redox-Relay Heck Reaction of 2-Indole Triflates

A palladium-catalyzed enantioselective redox-relay Heck reaction of 2-indole triflates and disubstituted alkenes is reported. This process combines readily available indole triflates with a variety of alkenes to afford a range of indole derivatives bearing a stereocenter adjacent to C2. Enantioselectivity is achieved through use of a simple pyridine-oxazoline ligand. Tuning the electronics of the indole, through judicious choice of N-protecting group, is required to ensure selective β-hydride elimination away from the indole core. Utility of this method is highlighted in a modular formal synthesis of an S1P₁ agonist precursor developed by Merck.     

Photoinduced C(sp3)−N Bond Cleavage Leading to the Stereoselective Syntheses of Alkenes

Herein we report a versatile Mizoroki–Heck-type photoinduced C(sp³)−N bond cleavage reaction. Under visible-light irradiation (455 nm, blue LEDs) at room temperature, alkyl Katritzky salts react smoothly with alkenes in a 1:1 molar ratio in the presence of 1.0 mol % of commercially available photoredox catalyst without the need for any base, affording the corresponding alkyl-substituted alkenes in good yields with broad functional-group compatibility. Notably, the E/Z-selectivity of the alkene products can be controlled by an appropriate choice of photoredox catalyst.     

Elucidating the Anomalous Binding Enhancement of Isoquinoline Boronic Acid for Sialic Acid Under Acidic Conditions: Expanding Biorecognition Beyond Vicinal Diols

A zwitterionic heterocyclic boronic acid based on 4-isoquinolineboronic acid (IQBA) exhibits the highest reported binding affinity for sialic acid or N-acetylneuraminic acid (Neu5Ac, K=5390±190 m ⁻¹) through the formation of a cyclic boronate ester complex under acidic conditions (pH 3). This anomalous pH-dependent binding enhancement does not occur with common neutral saccharides (e.g., glucose, fructose, sorbitiol), because it is mediated via selective complexation to a α-hydroxycarboxylate moiety forming a stable ion pair and ternary complex with Neu5Ac in phosphate buffer. IQBA expands biorecognition beyond classical vicinal diols under neutral or alkaline buffer conditions, which enables the direct analysis of Neu5Ac by native fluorescence with sub-micromolar detection limits.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

1,10-Phenanthroline: A versatile ligand to promote copper-catalyzed cascade reactions

Ligand-promoted copper-catalyzed cascade reactions have become a robust tool for the synthesis of cyclic compounds. Although numerous ligands have been developed, this review focuses on the introduction of commercially available 1,10-phenanthroline-promoted copper-catalyzed cascade reactions in recent years. Moreover, based on original articles, this review highlights product yields in the presence and absence of the ligand, and the possible mechanistic role of the ‘copper/1,10-phenanthroline’ catalytic system.     

Synthesis of Novel Triazole Incorporated Thiazolone Motifs Having Promising Antityrosinase Activity through Green Nanocatalyst CuI-Fe3O4@SiO2 (TMS-EDTA)

In the present work, novel 5-((1-benzyl-1,2,3-triazol-4-yl)methoxybenzylidene)-2-(arylamino)thiazol-4-one thiazolone incorporated triazole derivatives have been designed as tyrosinase inhibitors. The compounds were synthesized through click reaction in good yield. Moreover, the antityrosinas activity of the synthesized derivatives was evaluated. In the search for establishing a click copper-catalyzed azide/alkyne cycloaddition (CuAAC) reaction under strict conditions, in terms of a novel air-stable, a recyclable and efficient magnetic catalyst was planned for new triazole derivatives as a well-organized copper iodide supported on the functionalized Fe₃O₄@SiO₂ core-shell (CuI/Fe₃O₄@SiO₂(TMS-EDTA) nanoparticles). The engineered nanocatalyst synthesized for the first time and characterized by different methods, including FT-IR spectroscopy, XRD, FESEM, EDX, TEM, TGA, and BET analysis. The excellent catalytic performance in ethanol with high surface area (351.7 m²g⁻¹) and short reaction time for diverse functional groups (120–200 min), no use of toxic solvents, reusability of the catalyst, and using eco-friendly conditions are the advantageous of this work. Moreover,the nanocatalyst can be used at least five times without any significant decrease in the yield of the reaction. The thiazolidine-triazole derivatives 9a , 9c , 9e , and 9 g showed promising tyrosinase inhibitory activity with IC₅₀ values in the range of 5.90–9.81 μM. The compounds were found to be considerably more potent tyrosinase inhibitors than the reference inhibitor kojic acid (IC₅₀ = 18.36 μM).     

Sulfonic acid-functionalized Fe3O4-supported magnetized graphene oxide quantum dots: A novel organic-inorganic nanocomposite as an efficient and recyclable nanocatalyst for the synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives

In this research, the main emphasis has been focused on the preparation of a novel Fe₃O₄-supported propane-1-sulfonic acid-grafted graphene oxide quantum dots (Fe₃O₄@GOQD-O-(propane-1-sulfonic acid)) that it was readily synthesized via a five-step procedure as a hitherto unreported magnetic nanocatalyst. This newly prepared Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) nanocomposite was structurally well-established by different analytical techniques including Fourier transform infrared (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), thermal gravimetric analysis (TGA), field emission gun-scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM) and vibrating sample magnetometer (VSM) analyses. The high catalytic performance of this nanocomposite was exhibited in one-pot synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives under mild conditions. Low reaction times, excellent yields of the products, benignity of the catalyst, easy reaction work-up and magnetic recyclability of the catalyst are the main advantages of the present protocol. Also, our research indicated that the Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) could be reused up to five times without considerable loss of catalytic activity.